OKI ML 321 Printer driver download
6.1.7233.0
Oki ML 321 Elite (Microline)
6.1.7233.0
Okidata ML 321 Turbo/D (DEC)
Okidata ML 321 Turbo/D (IBM)
Okidata ML 321-IBM
The following are some common failures of , as well as the solutions to these failures. If you encounter some problems during the driver installation, or after installing the driver, these devices still cannot be used normally, it is recommended to find the corresponding problems and solutions from here, and these problems are relatively common problems.
In addition, many times the device cannot work normally, and it is not necessarily because the driver is not installed properly. Most of the problems are caused by the following reasons:
1. Hardware problems, such as hardware damage, loose wiring, too much dust covering the hardware. . .
2. Operating system and driver are not compatible.
3. The parameter setting of the hardware device is wrong, which causes that sometimes it can work normally, and sometimes it can’t work normally.
4. Conflicts with other software, such as conflicts in occupying hardware resources, accidental deletion or modification of driver files.
If the drivers provided above are not what you want, or if you want to download drivers for other devices, you can enter the device name in the input box at the top of the page to quickly find various drivers.
How to Manually Install Driver FilesAfter downloading the driver client, double-click to run the program, and then click the "Download Driver" button.At this time, the program will automatically download all the driver files.After the p…
How to download and run the driver clientAfter you enter the correct verification code, you will get a driver client download address, as shown below:We provide two download methods:1 Click the blue font part to download directly using the b…
Printer Driver Installation MethodFirst, connect the printer to the computer host, usually through a serial port or USB interface to connect to the computer host. Some printers also need to connect to the network through a wired or wi…
How to Manually Delete Printer Driver Under Windows SystemBefore deleting the printer, you must disconnect the USB cable between the printer and the computer host, and restart the computer.Do not perform any printing operations after restarting the computer.…
Guest: [June 27, 2022] : Epson L3169 printer wifi fails, what should I do?Reply: Step 1: Check if the printer is connected wirelessly (Wi-Fi).Models without a screen:The indicator l …view >>>
Guest: [June 20, 2022] : The epson L1118 keeps prompting that the paper is not loaded correctly. What is the reason?Reply: Usually, when it indicates that the paper is not loaded correctly, you can check whether the sensor …view >>>
Guest: [June 09, 2022] : How does epson L3153 print remotely?Reply: 1. Log in to any mailbox, send an email to the printer, and the printer will automatically print the …view >>>
Guest: [June 06, 2022] : Hello, my Epson L3119 printer has been used for more than two years. It has been normal before. Rece …Reply: For a printer that has been used for a long time, due to various reasons, there may be a problem wit …view >>>
Guest: [May 30, 2022] : Mine is epson L3118. When I use it today, it shows error 000031 and the red light flashes twice. Is …Reply: First, you can check the encoder disk and grating. If there is no abnormality, remove the cleaning u …view >>>
Guest: [May 12, 2022] : The recent color display of my computer is not very normal. I would like to ask what is the reason?Reply: Such failures generally have the following reasons:1. Poor contact between the display card and the …view >>>