Enter the device name, select the driver type, and click the "Search button" to search for its driver.
Atheros Bluetooth Audio Bluetooth driver download
The drivers contained on this page are suitable for the device name is: Bluetooth Audio. Before downloading, please check that your operating system version is included in the list below, so that the device will work better.
Driver Package Download
Please select the driver released by this manufacturer according to your device type and the manufacturer of the device, and then click the "Download" button to get the download address of driver packages for this device.
For OS
Version
Type
Applicable Devices
Download
Languages supported by this driver package: English
Windows 2000 (32 bit)
Windows 2000 (64 bit)
Windows 2000 (64 bit)
[12/19/2012]
9.2.1.0002
[09/04/2012]
9.02.00.0001
9.2.1.0002
[09/04/2012]
9.02.00.0001
MEDIA
Bluetooth Device
Bluetooth Device
Bluetooth Audio Bus Device
Common malfunction & Repair methods
The following are some common failures of , as well as the solutions to these failures. If you encounter some problems during the driver installation, or after installing the driver, these devices still cannot be used normally, it is recommended to find the corresponding problems and solutions from here, and these problems are relatively common problems.
When the inkjet printer is used, paper jams often occur during printing, and the paper cannot be aut …view
Printer Faults | Views: 553
The printer found many toner stains on the printed paper when printing. …view
Printer Faults | Views: 549
The motherboard of the computer is integrated with AC'97 sound card. Later I bought a PCI sound card …view
Sound Card Faults | Views: 520
When the system starts, the sound is normal, but as long as the music file is played, it will freeze …view
Sound Card Faults | Views: 391
It turned out that only one of the speakers had sound and the other had no sound. Later, the audio j …view
Sound Card Faults | Views: 623
After inserting the USB flash drive into the USB interface, the prompt of "finding a new device …view
USB Faults | Views: 692
In addition, many times the device cannot work normally, and it is not necessarily because the driver is not installed properly. Most of the problems are caused by the following reasons:
1. Hardware problems, such as hardware damage, loose wiring, too much dust covering the hardware. . .
2. Operating system and driver are not compatible.
3. The parameter setting of the hardware device is wrong, which causes that sometimes it can work normally, and sometimes it can’t work normally.
4. Conflicts with other software, such as conflicts in occupying hardware resources, accidental deletion or modification of driver files.
Use the search function to quickly find the driver you need
If the drivers provided above are not what you want, or if you want to download drivers for other devices, you can enter the device name in the input box at the top of the page to quickly find various drivers.
Other Device Driver
#1
Guest
[April 20, 2022]
I have encountered such a situation: the mobile phone is connected to the computer via bluetooth, and the computer shows that the connection is successful, but the mobile phone shows "the pin code or pairing key is incorrect and cannot be paired with xx". Guest [April 20, 2022] AdminReply:1. Turn on the bluetooth on both the computer and the mobile phone, and "add bluetooth or other devices" on the computer
2. Click on your mobile phone, the computer initiates a Bluetooth connection application, and a prompt pops up. Click OK on the computer first, then click OK on the mobile phone. At this time, the computer shows that the connection is successful, and the mobile phone shows that the connection fails.
3. Wait for a few seconds, and turn off the Bluetooth of your mobile phone. Turn on the Bluetooth of your mobile phone again, and your computer will appear in the paired list. (If the paired computer does not appear in the phone, repeat the above steps)
4. Open "Devices and Printers" on the computer, find and double-click your mobile device in "Devices" to display your device properties.
5. Select "Service" in the current device properties, and wait for the loading to complete. Several functions appear, and check "Advanced Audio" among them. Then click "OK".
6. Open the Bluetooth audio receiver application, wait for the phone to appear, and click "Open connection".
7. Check the Bluetooth settings of the mobile phone, and the paired computer device will appear "Connected | In Use (Media) SBC". Then it is OK.
8. The mobile phone plays music, and the sound is output from the computer. At this time, adding a mz on-screen assistant can easily control the mobile phone on the computer. Meanwhile, you can watch the screen of the mobile phone, and listen to the music playing on the mobile phone through the computer.
Reply #1
Leave a Reply
How to Manually Install Driver FilesAfter downloading the driver client, double-click to run the program, and then click the "Download Driver" button.At this time, the program will automatically download all the driver files.After the p…
How to download and run the driver clientAfter you enter the correct verification code, you will get a driver client download address, as shown below:We provide two download methods:1 Click the blue font part to download directly using the b…
Printer Driver Installation MethodFirst, connect the printer to the computer host, usually through a serial port or USB interface to connect to the computer host. Some printers also need to connect to the network through a wired or wi…
How to Manually Delete Printer Driver Under Windows SystemBefore deleting the printer, you must disconnect the USB cable between the printer and the computer host, and restart the computer.Do not perform any printing operations after restarting the computer.…
•Guest: [June 27, 2022] : Epson L3169 printer wifi fails, what should I do?
Reply: Step 1: Check if the printer is connected wirelessly (Wi-Fi).Models without a screen:The indicator l …view >>>
Guest: [June 27, 2022] : Epson L3169 printer wifi fails, what should I do?Reply: Step 1: Check if the printer is connected wirelessly (Wi-Fi).Models without a screen:The indicator l …view >>>
•Guest: [June 20, 2022] : The epson L1118 keeps prompting that the paper is not loaded correctly. What is the reason?
Reply: Usually, when it indicates that the paper is not loaded correctly, you can check whether the sensor …view >>>
Guest: [June 20, 2022] : The epson L1118 keeps prompting that the paper is not loaded correctly. What is the reason?Reply: Usually, when it indicates that the paper is not loaded correctly, you can check whether the sensor …view >>>
•Guest: [June 09, 2022] : How does epson L3153 print remotely?
Reply: 1. Log in to any mailbox, send an email to the printer, and the printer will automatically print the …view >>>
Guest: [June 09, 2022] : How does epson L3153 print remotely?Reply: 1. Log in to any mailbox, send an email to the printer, and the printer will automatically print the …view >>>
•Guest: [June 06, 2022] : Hello, my Epson L3119 printer has been used for more than two years. It has been normal before. Rece …
Reply: For a printer that has been used for a long time, due to various reasons, there may be a problem wit …view >>>
Guest: [June 06, 2022] : Hello, my Epson L3119 printer has been used for more than two years. It has been normal before. Rece …Reply: For a printer that has been used for a long time, due to various reasons, there may be a problem wit …view >>>
•Guest: [May 30, 2022] : Mine is epson L3118. When I use it today, it shows error 000031 and the red light flashes twice. Is …
Reply: First, you can check the encoder disk and grating. If there is no abnormality, remove the cleaning u …view >>>
Guest: [May 30, 2022] : Mine is epson L3118. When I use it today, it shows error 000031 and the red light flashes twice. Is …Reply: First, you can check the encoder disk and grating. If there is no abnormality, remove the cleaning u …view >>>
•Guest: [May 12, 2022] : The recent color display of my computer is not very normal. I would like to ask what is the reason?
Reply: Such failures generally have the following reasons:1. Poor contact between the display card and the …view >>>
Guest: [May 12, 2022] : The recent color display of my computer is not very normal. I would like to ask what is the reason?Reply: Such failures generally have the following reasons:1. Poor contact between the display card and the …view >>>